Petrogenesis of the microcrystalline-dioritic enclaves from Jiuling granitoids in the eastern segment of Jiangnan Orogen and constraints on magma source materials     

《China Geology》2018,1(3):374-391

Numerous dark enclaves with different shapes are found in Jiuling Neoproterozoic granitoids. Precise LA-ICP-MS U-Pb dating was conducted on zircons extracted from two microcrystalline enclave samples, yielding crystallization ages of 822.6±5.8 Ma and 822.2±6.2 Ma, respectively. The consistent ages within analytical errors with the host granitoids suggested that they were the products of the same magmatism. The microcrystalline-dioritic enclaves commonly show plastic forms and contain similar plagioclase megacrysts to the host rocks, and both of the enclaves and host granitoids showed a complex composition and structural imbalance in plagioclases. Furthermore, the apatites with a euhedral acicular shape occurred widely in the microcrystalline-dioritic enclaves. All of these petrographic features above imply magma mixing is involved in their diagenesis. The enclaves and host granitoids show a marked zircon trace element difference and Hf isotopic signatures without correlation in zircon trace element pairs but form their own system between enclaves and host granitoids. Additionally, most of the zircons show extremely high ε_Hf (t) with ε_Hf (t) =3.54–11.94 from the southern samples, and ε_Hf (t) =1.0–9.09 from the central region. Some zircons with the higher ε_Hf (t) are similar to the zircons from the juvenile island arc in the eastern segment of Jiangnan Orogen. Integrated geological and Hf isotopic characteristics suggest microcrystalline-dioritic enclaves were derived from the partial melting process of the Mesoproterozoic crust which enriched juvenile island arc materials and mixed with the granitic magma that remelted from the Mesoproterozoic continental crust which relatively enriched ancient sediments and mixed with the host granitoid in diagenesis.  相似文献   

Multi-factor sensitivity analysis on the stability of submarine hydrate-bearing slope     

《China Geology》2018,1(3):367-373

There are many factors affecting the instability of the submarine hydrate-bearing slope (SHBS), and the interaction with hydrate is very complicated. In this paper, the mechanical mechanism of the static liquefaction and instability of submarine slope caused by the dissociation of natural gas hydrate (NGH) resulting in the rapid increase of pore pressure of gas hydrate-bearing sediments (GHBS) and the decrease of effective stress are analyzed based on the time series and type of SHBS. Then, taking the typical submarine slope in the northern South China Sea as an example, four important factors affecting the stability of SHBS are selected, such as the degree of hydrate dissociation, the depth of hydrate burial, the thickness of hydrate, and the depth of seawater. According to the principle of orthogonal method, 25 orthogonal test schemes with 4 factors and 5 levels are designed and the safety factors of submarine slope stability of each scheme are calculated by using the strength reduction finite element method. By means of the orthogonal design range analysis and the variance analysis, sensitivity of influential factors on stability of SHBS are obtained. The results show that the degree of hydrate dissociation is the most sensitive, followed by hydrate burial depth, the thickness of hydrate and the depth of seawater. Finally, the concept of gas hydrate critical burial depth is put forward according to the influence law of gas hydrate burial depth, and the numerical simulation for specific submarine slope is carried out, which indicates the existence of critical burial depth.  相似文献   

塔里木溢流玄武岩火山通道的三维结构及其热成因气体释放   总被引：1，自引：1，他引：0  

王磊  田伟  魏子寒  弓明月  李晓敏 《岩石学报》2018,34(1):75-90

塔里木上奥陶统-志留系沉积地层中广泛发育早二叠世溢流玄武岩的火山通道相岩床-岩墙网络。三维地震数据解释结果显示,这些火山通道以平行围岩地层的岩床和斜切围岩地层的"碟状岩床"为主要特征。在玄武岩喷发过程中,火山通道岩浆的热量可以导致沉积围岩发生热接触变质并将沉积围岩中的有机质转化为"热成因气体"。在塔北英买2井区火山通道烘烤沉积围岩模型基础上,利用有限元热模拟方法确定了该区早二叠世玄武岩喷发时火山通道热烘烤影响范围随时间的变化。基于沉积围岩有机质丰度估算,该区热烘烤成因甲烷释放量可达11.3Gt(即113亿吨)。如果整个塔里木溢流玄武岩省具有与英买2地区相同的释放强度,则塔里木溢流玄武岩省活动期间释放的甲烷总量可达7062.5Gt,必然导致非常显著的环境效应。同时,玄武岩火山通道岩浆引起的热接触变质作用对已存在的油藏具有明显的破坏作用,塔里木盆地古生界总量约8~10Gt的油藏破坏和大量沥青的形成可能与此有关。  相似文献   

基于边坡稳定性计算方法比较分析          下载免费PDF全文

陈卫华  胡福洪  陈锋 《探矿工程》2018,45(9):71-74

将强度折减法应用于边坡稳定性分析中,折减土体强度,代入有限元程序进行计算,直至计算不收敛,此时的折减系数即为安全系数。结合工程实例,将强度折减法应用于边坡稳定性的分析,利用瑞典圆弧法,结合岩土工程设计类软件天汉以及有限元分析软件ABAQUS分析边坡稳定性,并对安全系数进行对比,3种计算方法得出的安全系数差别不大,安全系数精度都能满足工程要求。  相似文献   

高压超高压变泥质岩适用的地质温压计评述     

王晓赛  杜瑾雪  田野 《岩石矿物学杂志》2018,37(2):325-341

高压超高压变泥质岩形成温压条件及p-T演化轨迹是高压超高压变质作用研究的重要内容。本文介绍了高压超高压变泥质岩适用的几种地质温压计,包括石榴子石-多硅白云母Fe~(2+)-Mg交换温度计、石榴子石-绿泥石Fe~(2+)-Mg交换温度计、硬绿泥石-绿泥石Fe~(2+)-Mg交换温度计、多硅白云母Si含量压力计、金红石Zr含量温度计、榍石Zr含量温压计、锆石Ti含量温度计、石英Ti含量温度计以及氧同位素温度计,并对上述温压计的适用条件及使用时的注意事项做了简要评述。  相似文献   

页岩压裂影响因素三维模型数值分析     

张健  张国祥  王金意 《江苏地质》2018,42(1):127-130

不同影响因素对页岩水力压裂效果有不同的影响。基于三维数值计算模型介绍了水力压裂的典型过程,针对水平最小主应力、页岩的弹性模量和渗透系数对压裂的影响进行了分析。结果表明:随着水平最小主应力的增加,裂缝高度也随之增加;随着页岩的弹性模量增加,裂缝的高度随之降低;随着渗透系数的增加,裂缝高度也随之增加;随着压裂液的黏度系数提高,裂缝的高度降低。  相似文献   

江苏灌河入海口附近重金属元素环境地球化学质量分析     

夏同法  梁胜跃  徐明钻 《江苏地质》2018,42(4):641-650

以往对灌河口附近海域进行地球化学调查发现,海底沉积物及海水质量总体良好,但局部沉积物中Cr含量高于一类标准,Cu、As、Pb、Hg等其他重金属元素含量也明显高于其他地区,个别重金属元素已接近一类标准最高限,存在潜在生态风险。为进一步了解其与人类活动是否有关,对灌河靠近入海口40 km长的河水进行了地球化学调查,发现灌河河水中Hg、Cu、Pb等重金属元素存在一定程度的超标现象。结合其他证据认为,人类活动不仅对灌河下游河水质量产生了负面影响,还对入海口附近的海域环境质量产生了潜在威胁。借鉴内梅罗综合指数评价思路对灌河下游及入海口的重金属元素环境质量进行评价,并对如何降低、消除生态风险提出了若干建议。  相似文献   

开挖条件下含陡倾结构面顺层岩质边坡破坏模式与稳定性预测     

王章琼  江志红 《中国地质灾害与防治学报》2018,29(1):40-45

顺层岩质边坡易发生失稳破坏,当边坡中发育有顺坡向陡倾结构面时,更不利于边坡稳定。以贵州某水电站大坝左岸含陡倾结构面顺层边坡为例,在综合分析地质条件及开挖扰动的基础上,结合离散元软件UDEC,分析了边坡的变形破坏模式和稳定性。研究结果表明,边坡可能发生的变形破坏模式主要有滑移、拉裂—滑移两种;自然状况下及开挖后,边坡都有沿断层f_9、卸荷裂隙L_1及岩层面发生滑移的趋势,且工程开挖导致边坡沿该结构面发生内部滑动;对边坡采用预应力锚索加固后,变形得到有效控制,位移数值计算值与实际监测值基本吻合。  相似文献   

碘化氨除锡后封闭酸溶-电感耦合等离子体质谱测定锡矿石中的共生和伴生元素   总被引：1，自引：1，他引：0  

马生凤  赵文博  朱云  孙红宾  王蕾  温宏利 《岩矿测试》2018,37(6):650-656

锡矿石是难分解的矿物,主要存在形式是锡石(SnO_2),且共生和伴生元素多,常用的酸溶方法几乎不能溶解SnO_2,从而给锡矿石中的共生与伴生元素的准确测定带来困难。本文基于碘化氨在较低温度下熔融可产生无水状态的碘化氢,利用碘化氢的酸性和氨的还原性分解SnO_2,使Sn呈SnI_4升华分离的原理处理锡矿石。实验中以高纯铂丝作催化剂,加入碘化铵在450℃的马弗炉中分解锡矿石30 min,使得Sn以SnI_4形式挥发,除锡率达到98%以上,再用2 mL氢氟酸和1 mL硝酸封闭溶解残渣,电感耦合等离子体质谱测定钴镍铜铌钽钍铀等24个共生和伴生元素。元素检出限在0. 001～2. 9μg/g之间,90%以上元素的相对标准偏差(RSD)小于5%,相对误差小于10%。本方法解决了锡矿石难分解的问题,可测定共存金属元素,也适合测定Sn含量在1. 27%～62. 49%之间的锡矿石中的微量和痕量元素及锡精矿中的微量元素。  相似文献   

安徽省东源斑岩型钨矿床白钨矿原位微量元素特征及其指示意义   总被引：3，自引：1，他引：2  

聂利青  周涛发  汪方跃  张达玉  陈雪锋  肖庆玲  李旋旋  位欧详 《矿床地质》2018,37(6):1237-1246

新兴的白钨矿面扫描技术对于解释矿物微量元素特征具有重要的指示意义。文章选择皖南地区东源斑岩型钨矿床中白钨矿为研究对象,利用面扫描和阴极发光图像技术对矿物微区结构和原位微量元素特征进行系统研究。分析结果显示,白钨矿具有核边结构且微量元素特征具有明显的分带性,同一白钨矿颗粒核部亏损Mo、Nb、Ta元素,富集REEs,而边部相反。在此基础上,文章通过系统的白钨矿单点微量元素分析,反演了成矿流体性质和演化过程,提出东源钨矿床成矿流体氧逸度逐渐增高,成矿流体富集F挥发分且F含量逐渐增加,成矿物质很可能有幔源组分加入。通过白钨矿面扫描和阴极发光图像查明矿物微区结构,进而开展了白钨矿微区微量元素单点分析,有可能对成矿流体和矿质来源作出合理的解释。  相似文献